We provide a wide range of semi-finished products (flat rolling, wire, soldering materials, tubes made from platinum group metals, gold, silver and its alloys), which can be applied in the variety of industries from jewelry to electrical engineering.
Tubes
Diameter ranges from 50 to 6 mm, wall thickness is from 3 to 0,2 mm, length is from 1 to 2 m
Application of welded blanks allows production of tubes with the diameter up to 250mm, and applying welded capillary blanks lets wall thickness up to 0,05 mm and more.
Wire
We provide wire of various diameters made of Pt, Au, Ag and alloys thereof
Field of application-electronics, electrical engineering, jewelry manufacturing.
The wire is available made from semicircular, radial, quadratic or rectangular blanks of precious metals with the diameter from 0,008 mm. Terms of Delivery — on bundle or spool.
Upon customers' request the wire can be specially heat treated.
We can also provide bimetallic wire with profile section, wire made of «fibrous» material having high homogeneity and thermo stability. GOST 7222—75 and GOST 18389—73
Solders
Our technicians will assist in choosing the right composition of the solder with applicable fusion temperature and mechanical properties. We guarantee in time delivery and compliance with high quality standards.
The composition of soldering materials and their application are presented in below table.
| Description | Au | Ag | Pd | Other components | t° of soldering | Field of application |
| Solder Au 585 | 58,5–59,0 | 9,0–17,0 | — | Cu, Cd, Zn, In | 765–883 | Jewelry |
| Solder Au 585 . | 58,5–59,0 | 10,5–18,0 | — | Cu, Cd., Cz | 710–740 | Jewelry |
| Solder Au 585 | 58,5–59,0 | 10,5–18,0 | — | Cu, Cd., Cz | 810–840 | Jewelry |
| Solder Au 585 | 58,5–59,0 | 18,0–25,5 | — | Pd, Cu, Ni, Zn | 800–1100 | Jewelry |
| Solder Au 750 | 6,0–13,0 | 6,0–13,0 | 0–10,0 | Cu, Cd., Cz | 740–1000 | Jewelry |
| Solder Au 750 | 74,5–75,5 | — | — | Ag, Cu, Zn, B | 850–890 | Engineered materials |
| Solder AuAgCdCu | 74,5–75,5 | 2,5–3,5 | — | Cd | 725–745 | Dentistry |
| Solder Ag 32 | 1,0–72,0 | — | — | Sn, Cd, P, Cu, Ni, Zn | 180–800 | Engineered materials, Dentistry |
| Solder AgCuZn 37 | 36,0–38,0 | — | — | Mn, Ni, Mg, Zn, Cd | 710–740 | Stomatology |
The solders based on platinum and palladium are applied for soldering of jewelry items and specific products.
The solders have been fabricated in the form of free-flowing scaly material of the following dimensions:
- 0.1—0.01 mm thickness;
- 2.0 — 10.0 mm width;
- length — not less than 20 mm.
The chemical content of solders corresponds to the requirements of the Table 1.
Table 1
The Chemical Content of Solders Based on Platinum and Palladium
| Alloy mark | The mass share of components, % * |
| Platinum | Palladium | Copper | Silicon** |
| PtCuSi 95–2 | 95.0–95.5 | — | 1.5–2.5 | The rest |
| PtPdSi 95–2 | 95.0–95.5 | 1.5–2.5 | — | The rest |
| PtPdCuSi 85–12 | — | 85.0–85.5 | 11.5–12.5 | The rest |
| PdCuSi 90 | — | 90.0–90.5 | 6.5–7.5 | The rest |
| PdCuSi 95 | — | 95.0–95.5 | 1.5–2.5 | The rest |
* Impurity level hasn't not been determined, and it is regulated by charged materials.
** The mass share of silicon is defined as a balance between 100 % and the sum of determined components.
Properties of the solders are listed in the Table 2.
Table 2
Properties of the Solders Based on Platinum and Palladium
| Solder Brand | Calculated Density, g/sm3 | Melting Temperature (Interval), оС |
| PtCuSi 95–2 | 16.84 | 950–1050 |
| PtPdSi 95–2 | 16.98 | 960–1100 |
| PtPdCuSi 85–12 | 10.34 | 800–1100 |
| PdCuSi 90 | 10.49 | 810–1150 |
| PdCuSi 95 | 10.66 | 820–1200 |
Rolling
We provide an extended range of flat rolling according to the table below:
| Description | Size of semi-finished products (mm.) |
| Thickness | Width | Length |
| Strips | 0.10–10.00 | 50.0–250.0 | 200.0–500.0 |
| Foil | 0.004–0.09 | Up to 200.0 | Up to 500.0 |
| Flat tape | 0.005–0.80 | 0.15–3.00 | From 500 |
